Super DriveLock

Since some hard drives, when attached to the SDL, will not be recognized when connected to native SATA ports on some PC’s, ICS recommends the use of the E-SATA controller card to ensure 100% compatibility with both the PC and the drive connected to the SDL. Besides guaranteed drive detection the E-SATA controller supports “hot swap”.

Super DriveLock Basic Kit
eSATA Connection to your PC or NoteBook!
New Super DriveLock provides the “all in one” write-protect solution for today’s most common interface technologies including P-ATA, S-ATA, SCSI and USB.

Price: $950.00 QTY
Product Number: F.GR-0028-000A

Prices in $ are for purchase and delivery within the USA only.

For international sales please contact our Distributors world wide and they will be happy to quote and support your ICS products.

The Super DriveLock is the only blocker in the market today that prevents accidental writes to Hard Drives combining so many interfaces in one single device. As stand alone or in-Bay, the Super DriveLock supports IDE 133 drives, SATA II drives with 3Gbit/sec, SCSI drives with 320 MB/sec, and USB 2.0 storage with 480 Mbit/sec.

Alternative Views

Features

Software

Optional Software

Optional Hardware

Specifications

Compatibility


.: Multi Media Write-Protect Support: Built-in USB 2.0, P-ATA, S-ATA and SCSI interfaces provide native write protect support for USB, P-ATA, S-ATA, and SCSI devices. Supports SCSI interfaces such as Ultra-160 and Ultra-320, including SCSI Narrow (50-pin), SCSI Wide (68-pin) and SCSI-SCA80 (80-pin). Supports 3.3v devices. .: High Speed Operation: Transfer rates can exceed 3.5GB/min .: Multiple O/S Host Support: Supports Windows XP, Windows VISTA and Linux. .: Upgradeable Firmware: The unit's firmware can be easily upgraded using the PC's interface. .: Multiple Host Interface Support: Unit can be connected to the PC or Notebook using multiple interfaces such as native S-ATA port, eSATA controllers, eSATA CardBus adapters. .: Portable: Can be used as a portable device or mounted in a PC available drive bay. .: HPA/DCO Support: Detects HPA and DCO areas .: 3.3v Device Support: Provides output for devices which require 3.3v for operation. .: Status leds: 4 leds; IDE drive detected, SATA drive detected, SCSI drive detected, USB device detected