.: Multi Media Write-Protect Support: Built-in USB 2.0, P-ATA and S-ATA and interfaces provide native write protect support for USB, P-ATA, and S-ATA devices. Supports 3.3v devices.

.: High Speed Operation: Transfer rates can exceed 3.5GB/min

.: Multiple O/S Host Support: Supports Windows XP, Windows VISTA and Linux.

.: Upgradeable Firmware: The unit's firmware can be easily upgraded using the PC's interface.

.: Multiple Host Interface Support: Unit can be connected to the PC or Notebook using multiple interfaces such as native S-ATA port, eSATA controllers, eSATA CardBus adapters.

.: Portable: Can be used as a portable device or mounted in a PC available drive bay.

.: HPA/DCO Support: Detects HPA and DCO areas

.: 3.3v Device Support: Provides output for devices which require 3.3v for operation.

.: Status leds: 4 leds; IDE drive detected, SATA drive detected, USB device detected

.: eSATA PCI-EXP Controller Card:Provides a “hot swap” eSATA interface to connect the Super DriveLock with the PC.  Installs in a PC’s available Express Slot.
.: In-Bay Drive Tray and Cooling Fans: The "In-Bay Drive Tray" is designed for the use with the Super DriveLock and Super DrivePort when the devices are mounted in an available PC drive bay. Cooling fans are provided to keep the drives operating at proper temperatures.

Super DriveLock eSATA PCI Kit

Each kit includes:

(1) Super DriveLock Unit
(1) External USB Device Data Cable
(1) S-ATA Data/Power Cable
(1) 8" P-ATA Power Cable
(1) 6" S-ATA 3.3v/5v Power Cable
(1) 6" S-ATA Data Cable
(1) 5" P-ATA Data Cable
(1) eSATA to S-ATA Data Cable
(1) USB A to A F/W Upgrade Data Cable
(1) eSATA to eSATA Data Cable
(1) 36" P-ATA Power Cable
(1) 18" P-ATA Data Cable
(1) External Power Supply
(1) USB to S-ATA Adapter
(1) eSATA PCI Controller Card
(1) Hard Case
Warranty Documents


Super DriveLock unit sprecifications:

.: Maximum Possible Power: 9 watts typical operating ( not including hard disk)
.: Stand by Power: 5 watts
.: Supply Voltage (DC IN): +VDC @ 2A, +12VDC @ 2A ( includes budget for hard disk)
.: Output voltage (DC OUT): +5VCD @ 1A, +12VDC @ 1A
.: Dimensions: 5.75 in. (L) x 3.25 in. (W) x 1.125 in. (H)
.: Weight: 1 lb
.: Operating temperature range: 0 to 55 degrees C (no air flow)
.: Storage temperature range: -40 to 70 degrees C
.: Relative humidity: Up to 90% (non condensing)